Switch Off The Communica; Adjust The Volume; Connection From Helmet To - BMW Motorrad 76 01 7 723 987 Manual De Instrucciones

Sistema de comunicación
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 124
Switch off the
communication system
Press button 2 and hold it
down until a low-pitched con-
firmation tone sounds and red
LED 4 starts flashing.
If the communication sys-
tem fails for 15 minutes to
find any of the Bluetooth devices
with which it is paired, it switches
off automatically to save the
batteries.
The communication system
switches itself off; the red LED
flashes three times.

Adjust the volume

Press button 1.
The volume is reduced one
level each time the button is
pressed.
If the volume is set too
high there is a possibility
of not hearing other road users
(particularly police vehicles or
emergency-services vehicles).
High sound levels maintained
over lengthy periods, moreover,
can cause permanent damage to
the hearing.
Set the communication system
to a volume at which the sys-
tem's acoustic output does not
interfere with your awareness of
other road users.
Press button 3.
The volume is increased one
level each time the button is
pressed.
Connection from
helmet to helmet
Connection set-up
Connection set-up between two
helmets takes place automatically
as soon as both communication
systems have been switched on.
2
11
z

Publicidad

Tabla de contenido
loading

Tabla de contenido