BMW Motorrad 76 01 7 723 987 Manual De Instrucciones página 63

Simultaneously press button 2
and button 3 of one helmet
and hold them down until
green LED 6 doubles the rate
at which it flashes (i.e. starts
flashing at 2 Hz).
The communication system of
the first helmet is now visible
to other Bluetooth devices for
a maximum of 60 seconds; the
green LED flashes at a rate of
two flashes per second.
Simultaneously press button 2
and button 3 of the second
helmet and hold them down
until green LED 6 twice
doubles the rate at which it
flashes (i.e. starts flashing at 4
Hz).
The communication system
of the second helmet now
searches for another vis-
ible helmet for a maximum
of 60 seconds; green LED 6
flashes at a rate of four flashes
per second.
The green LED of searching hel-
met 2 flashes twice as fast as
the green LED of visible helmet
1.
If pairing is successful the
green LEDs of both helmets
light up for one second and the
voice connection is established.
A high-pitched confirmation
tone sounds in both helmets.
If pairing fails the red LED of
the searching helmet flashes
three times and a low-pitched
warning tone sounds. The
green LED then switches to
a slow flash, indicating that the
system is on standby.
If pairing is unsuccessful:
Switch off all other Bluetooth
devices in the immediate vi-
cinity and try to pair the two
helmets again.
It can take some time for a
Bluetooth device to be de-
tected. It is always best to activ-
ate the search function as soon
as possible after activating visib-
ility, so that the searching device
will have as long as possible to
find the visible device.
3
21
z