Connection From Music Play- Back Device To Helmet - BMW Motorrad 76 01 7 723 987 Manual De Instrucciones

refer to the instructions for use of
the device in question for details.
Note that the Bluetooth function
must be active; the communic-
ation system might have to be
authorised or authenticated.
Bluetooth devices have
to be "introduced to each
other " (paired) before they can
set up a connection for the first
time.
Music playback is interrupted for
navigation announcements. If the
navigation system is the BMW
Motorrad Navigator IV helmet-
to-helmet communication can
continue, but it too is interrupted
for announcements by any other
navigation system. An acoustic
alert sounds in the passenger-
's helmet to indicate that com-
munication has been interrup-
ted. Communication between the
two helmets is restored, or music
playback resumed, as applicable,
as soon as the announcement is
over.
Operation
Switch on the navigation device
and the communication sys-
tem.
Check the navigation device to
make sure that the connection
has been automatically estab-
lished.
If there is no connection:
Check the settings of the nav-
igation device.
Some Bluetooth devices
do not support automatic
connection set-up.
If necessary, manually establish
the connection to the commu-
nication system.
Connection from music
playback device to
helmet
Connection
Each helmet with a communica-
tion system can be paired with a
music playback device of its own,
but a music playback device can
be paired with only one helmet.
Bear in mind that A2DP is the
only playback format supported.
A2DP (Advanced Audio
Distribution Profile) is a
non-proprietary technology that
enables stereo audio signals to
2
15
z