Helmet; Connection From Telephone; Connection From Navigation - BMW Motorrad 76 01 7 723 987 Manual De Instrucciones

If there is no connection:
2
Check the settings of the tele-
phone.
14
Some Bluetooth devices
do not support automatic
connection set-up.
If necessary, manually establish
the connection to the commu-
nication system.
z
To reject an incoming call dur-
ing the time when the acoustic
alert sounds, briefly press but-
ton 2.
To pass an ongoing call back
to the telephone, briefly press
button 2.
To end a call, press and hold
down button 2 (for about 2
seconds).
For technical reasons, a
brief period might elapse
after the button is pressed before
the telephone actually terminates
the call.
Connection from
navigation device to

helmet

Connection set-up
Each helmet with a communica-
tion system can be paired with a
navigation device of its own, but
a navigation device can be paired
with only one helmet.
The configuration settings and
range of functions supported by
the navigation device determ-
ine whether or not connection
set-up between the communic-
ation system and the device can
take place automatically. Always