Deleting Pairing Entries - BMW Motorrad 76 01 7 723 987 Manual De Instrucciones

Simultaneously press
button 2 and button 3 of the
communication system and
hold them down until green
LED 6 doubles the rate at
which it flashes (i.e. starts
flashing at 2 Hz).
The communication system is
now visible to other Bluetooth
devices for a maximum of
60 seconds; the green LED
flashes at a rate of two flashes
per second.
Start the function that enables
the music playback device
to search for other Bluetooth
devices.
It can take some time for a
Bluetooth device to be de-
tected. It is always best to activ-
ate the search function as soon
as possible after activating visib-
ility, so that the searching device
will have as long as possible to
find the visible device.
If it is detected by the
music playback device,
the communication system
is listed as a headset
identified by the designation
"BMW_HELMET_II_xxxx". The
string "xxxx" stands for the ID
number of the communication
system.
Enter the security code "0000"
during the time in which the
helmet is visible to the other
Bluetooth device.
Green LED 6 shows briefly and
a high-pitched confirmation tone
sounds.

Deleting pairing entries

Switch on the communication
system.
3
25
z