Bluetooth devices have
2
to be "introduced to each
other " (paired) before they can
12
set up a connection for the first
time.
Helmet-to-helmet communication
is interrupted while a telephone
conversation is in progress or for
the duration of navigation-system
announcements; in the second
helmet an acoustic alert sounds
to indicate that communication
z
has been interrupted. Commu-
nication between the two hel-
mets is restored as soon as the
phone conversation or the an-
nouncement is over. The acous-
tic alert sounds again to indicate
that the connection enabling the
two helmets to communicate has
been re-established.
Exception: Helmet-to-helmet
communication is still possible
while the BMW Motorrad Nav-
igator IV issues its navigation
announcements.
Operation
Switch on the communication
systems of both helmets.
As soon as the connection
between the helmets has been
established, the green LEDs
light up and remain ON.
If communication is not possible:
Check both helmets to make
sure that neither is in music
mode.
If applicable, turn up the
volume.
Checking microphone align-
ment (
9).
To interrupt the connection
between the helmets, briefly
press button 2 twice (switch to
music mode).
To restore the connection
between the helmets, again
briefly press button 2 twice.