BMW Motorrad 76 01 7 723 987 Manual De Instrucciones página 58

be transmitted by Bluetooth to a
2
compatible receiver.
The configuration settings and
16
range of functions supported
by the music playback device
determine whether or not con-
nection set-up between the hel-
met unit and the device can take
place automatically. Always refer
to the instructions for use of the
device in question for details.
Note that the Bluetooth function
z
must be active; the communic-
ation system might have to be
authorised or authenticated.
Bluetooth devices have
to be "introduced to each
other " (paired) before they can
set up a connection for the first
time.
You must switch to music mode
in order to listen to music. In this
mode it is not possible to com-
municate with a second helmet.
Music mode is active by default
if the communication system has
not been paired with a second
helmet. Music mode has to be
activated manually if the helmet
is paired to a second communic-
ation system.
Music playback is interrupted for
the duration of a telephone con-
versation or a navigation-system
announcement.
Sound quality
To obtain the best possible
sound quality, BMW Motorrad
recommends the following
settings for your music playback
device:
Tone control: neutral or none
Loudness: OFF
Equaliser: OFF
The communication system uses
tone control that has been espe-
cially configured for the helmet
speakers. These can become
distorted by the settings of the
music playback device.
Operation
Switch on the music playback
device and the communication
system.
Check the music playback
device to make sure that the
connection has been estab-
lished.
If there is no connection:
Check the settings of the mu-
sic playback device.
Some Bluetooth devices
do not support automatic
connection set-up.
If necessary, manually establish
the connection to the commu-
nication system.