Listening To Station Presets; Changing The Frequency Step - Pioneer VSX-D712-S Manual De Instrucciones

08 Using the tuner

Listening to station presets

You will need to have some presets stored to
do this. See Saving station presets on page 54
if you haven't done this already.
1 Press TUNER to select the tuner.
2 Press CLASS to select the class in which
the station is stored.
Press repeatedly to cycle through classes A,
B and C.
3 Press ST +/– (STATION +/–) to select
the station preset you want.
• If the receiver is left disconnected from
the AC power outlet for an extended
period, the station memories will be lost
and will have to be reprogrammed.
56
En
All manuals and user guides at all-guides.com

Changing the frequency step

If you find that you can't tune into stations
successfully, the frequency step may not be
suitable for your country/region. Here's how
to switch the setting:
1 Switch the system into standby.
2 On the front panel, press STANDBY/
ON while you press and hold the BAND
button.
The channel tuning step alternates between
FM 100 kHz/AM 10 kHz, and FM 50 kHz/
AM 9 kHz each time you do this.