Using The Tuner; Listening To The Radio; Improving Fm Stereo Sound - Pioneer VSX-D712-S Manual De Instrucciones

Using the tuner

Chapter 8:
Using the tuner

Listening to the radio

The following steps show you how to tune in
to FM and AM radio broadcasts using the
automatic (search) and manual (step) tuning
functions. If you already know the frequency
of the station you want, see Tuning directly to
a station below. Once you are tuned to a
station you can memorize the frequency for
recall later—see Saving station presets on
page 54 for more on how to do this.
MASTER
VOLUME
TUNE
TUNE
BAND DTV ON/OFF
1 Press the TUNER button to select the
tuner.
2 Use the BAND button to change the
band (FM or AM), if necessary.
Each press switches the band between FM
and AM.
3 Tune to a station.
There are three ways to do this:
All manuals and user guides at all-guides.com
TUNER
MPX
Automatic tuning
To search for stations in the currently
selected band, press and hold TUNE +/–
for about a second. The receiver will start
searching for the next station, stopping
when it has found one. Repeat to search
for other stations.
Manual tuning
To change the frequency one step at a
time, press TUNE +/–.
High speed tuning
Press and hold TUNE +/– for high speed
tuning. Release the button at the
frequency you want.

Improving FM stereo sound

If the TUNED or STEREO indicators don't light
when tuning to an FM station because the
signal is weak, press the MPX button to
switch the receiver into mono reception
mode. This should improve the sound quality
and allow you to enjoy the broadcast.
08
53
En