Personnel Qualiication; Specialist Personnel For Operation; Specialist Personnel For Maintenance And; Servicing - HellermannTyton AT2000 CPK Manual Del Usuario

2.4

Personnel qualiication

Under-age persons and trainees are permitted to use the
device only under the supervision of an experienced
specialist and only with the express permission of the
operating company.

2.4.1 Specialist personnel for operation

The tasks and authorisations assigned to specialist
personnel for extended operation are as follows:
• Operation of the device
• Rectiication of faults or, as applicable, initiation of
measures for the rectiication of faults
• Cleaning of the device
These individuals have the specialist training or practical
experience that will ensure correct handling.

2.4.2 Specialist personnel for maintenance and

servicing

Always have maintenance and servicing carried out by
duly qualiied specialist personnel. These individuals have
the specialist training that affords suicient knowledge
of the device for them to judge when it is in safe
working order.
These individuals are also familiar with the following
rules and regulations:
• Applicable national health and safety regulations
• Accident prevention regulations
• Generally accepted rules of engineering practice (e.g.
employers' liability insurance association codes, DIN
standards, VDE regulations, technical rules of other
European Union member states or other states party to
the Agreement on the European Economic Area).
2.4.3 Authorised person for low-voltage electrical
equipment
Work on the electrical supply and on parts that are live
when the device is in operation should always be carried
out by a person duly authorised to work on low-voltage

electrical equipment.

2.4.4 Authorised specialist for repair and testing
Only service technicians from HellermannTyton or service
technicians certiied by HellermannTyton are permitted
to carry out repairs and safety checks.
Operating Instructions • AT2000 CPK • 02-2017 • v02 • 106-29004
2.5 Underlying hazards associated with use of the
device

2.5.1 Cleanliness at the workplace

Orderliness, good lighting and cleanliness at the
workplace all help to make work easier, minimise
hazards and reduce the risk of injury.
Always comply with the following principles of
orderliness and cleanliness at the workplace.
f Put tools away as soon as they are no longer needed.
f Avoid trips (e.g. immediately dispose of waste by placing
it in the containers provided for the purpose).
f Immediately remove spillages of grease, oil and other
liquids.
f Clean smears off the controls.

2.5.2 Spare parts and accessories

f Use only OEM spare parts.
f After parts have been replaced, always make sure that
everything is in full working order.
f Use only accessories approved by HellermannTyton.
Accessories can affect the way in which the device
works.
Safety warnings
8