Service Menu; Changing The Access Code In The At2000 - HellermannTyton AT2000 CPK Manual Del Usuario

8.4

Service menu

6
6
5
1 Interruption level sensor
2 "Check of binding" setting
3 Tool access code (AT2000 CPK)
4 Send data to tool (AT2000 CPK)
5 Refresh the service information and parameters
6 Information for HellermannTyton service
Operating Instructions • AT2000 CPK • 02-2017 • v02 • 106-29004
1
3
4
8.4.1 Changing other parameter settings
f Change the settings for the
f Click on
; The parameter settings are changed and the new
8.4.2 Changing the access code in the AT2000 CPK
f Enter the new code at
f Click on
; The access code is changed and transmitted to the
HT Data Management
2
(level 1-5) and/or Check of binding
Send data to tool.
settings are transmitted to the AT2000 CPK.
Tool
three-digit number and the default setting is 000.
Send data to tool.
AT2000 CPK.
Interruption front sensor
parameters.
code. The code is a
18