Noise And Vibration Information - HellermannTyton AT2000 CPK Manual Del Usuario

11.2 Power pack CPK
Line voltage
Line frequency
Protection class
Size L × W × H
Weight
Back-up battery
Operating Instructions • AT2000 CPK • 02-2017 • v02 • 106-29004
Value
100 V – 230 V
50/60 Hz
I
approx. 260 mm × 110 mm × 93
mm
approx. 1300 g
CR 2032 3V or equivalent
2 5 8

11.3 Noise and vibration information

Emission sound pressure level L
Uncertainty K
pA
Sound power level L
WA
Uncertainty K
WA
Aggregate igure for vibration a
Uncertainty K
The vibration level as stated here is a measured value
obtained by the standardised method set out in EN 60745-
1:2009; it can be used for the purposes of device
comparison.
The igure for vibration stated here is for the power tool
in conditions of its intended use and can differ from the
actual igure for the power tool in conditions of other
use or if not adequately serviced.
Accurately estimating vibration load over a certain work
period entails making due allowance for the times
during which the device is switched off or running, but
not actually in use. This can reduce vibration load over
the entire work period by a signiicant margin.
f Implement additional safety measures to protect the
operator from the effects of vibration, for example:
• Servicing of power tools and use tools
• Keeping hands warm
• Worklow organisation
Technical data
65 dB re20 μPa
pA
3 dB
76dB re1pW
3 dB
0.8 m/s 2
h
1.5 m/s 2
33