Russell Hobbs 23810-56 Manual De Instrucciones página 3

Read the instructions, keep them safe, pass them on if you pass the appliance on.
Remove all packaging before use.
IMPORTANT SAFEGUARDS
Follow basic safety precautions, including:
This appliance can be used by persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if they have been
supervised/instructed and understand the hazards involved.
Children must not use or play with the appliance. Keep the appliance and
cable out of reach of children.
To avoid injury, take care handling the blades, emptying the appliance, and
cleaning.
Always disconnect the appliance from the mains supply socket if it is left
unattended and before assembling, disassembling or cleaning.
Care must be taken when handling sharp cutting blades during emptying
and cleaning.
c Misuse of the appliance may cause injury.
Don't run the appliance for more than 3 minutes. After 3 minutes, switch off
for at least 2 minutes.
If the cable is damaged, it must be replaced by the manufacturer, its service
agent, or someone similarly qualified, to avoid hazard.
• Don't put the motor unit in liquid, don't use it in a bathroom, near water, or outdoors.
• Keep fingers, hair, clothing, kitchen utensils, etc. clear of movinfg parts, blades and attachments.
• Don't use the appliance for any purpose other than those described in these instructions.
• Don't use attachments or accessories unless we supply them.
• Don't use the appliance if it's damaged or malfunctions.
PARTS
1. Pusher
2. Feed tube
3. Thin spaghetti shape blade A
4. Thick spaghetti shape blade B
5. Ribbon shape blade C
BEFORE USING FOR THE FIRST TIME
1. Wash the removable parts in warm soapy water. Rinse and dry.
2. Wipe over the motor unit with a damp cloth.
ASSEMBLY
• Sit the appliance on a dry, stable, level surface.
• Route the cable so it doesn't overhang, and can't be tripped over or caught.
• Don't plug it in until you have finished assembling it.
1. Put the container underneath the opening on the motor unit.
2. Put the chosen blade into the opening on the motor unit (Fig. A).
3. Put the feed tube into the opening with the t aligned with the Usymbol (Fig B).
4. Turn the feed tube counter clockwise until the t is aligned with the Lsymbol (Fig C).
HOUSEHOLD USE ONLY
6.
7.
8.
` Dishwasher safe
3
Motor unit
Switch
Container