Personnel Qualifications; Electrical Work; Monitoring Devices - Wilo EMU TR 212 Instrucciones De Instalación Y Funcionamiento

en-US
2.2

Personnel qualifications

2.3

Electrical work

2.4

Monitoring devices

8
Safety
Personal protective equipment: wear foot protection
Personal protective equipment: wear hand protection
Personal protective equipment: wear a safety harness
Personal protective equipment: wear mouth protection
Personal protective equipment: wear safety goggles
Working alone is prohibited! A second person must be present.
Useful information
ƒ
Electrical work: qualified electrician
Someone with suitable technical training, knowledge and experience who can identify
and avoid the dangers associated with electricity.
ƒ
Installation/dismantling work: trained sewage technology professional
Fixation and pipework in wet well and dry well installation, lifting equipment, basic
knowledge of wastewater facilities.
ƒ
Maintenance work: trained sewage technology professional
Application/disposal of used operating fluids, basic engineering knowledge (installation/
dismantling)
ƒ
Lifting work: trained professional for operating lifting devices
Lifting equipment, lifting gear, attachment points
ƒ
Staff have been instructed on the locally applicable provisions for accident prevention.
ƒ
Staff have read and understood the installation and operating instructions.
ƒ
Have electrical work carried out by a qualified electrician.
ƒ
Disconnect product from power supply and secure against unauthorized reactivation.
ƒ
Observe applicable local regulations when connecting power.
ƒ
Observe the specifications of the local energy supplier.
ƒ
Train staff on how to set up the electrical connection.
ƒ
Train staff on the options for switching off the product.
ƒ
Adhere to the technical information in these installation and operating instructions as
well as on the rating plate.
ƒ
Ground product.
ƒ
Observe provisions for connection to the electrical switching systems.
ƒ
Comply with the specifications on electro-magnetic compatibility when using electronic
start-up controllers (e.g. soft starter or frequency converter). If required, take special
measures into account (e.g. shielded cables, filters etc.).
ƒ
Replace defective connection cables. Contact customer service.
The following monitoring devices must be provided by the customer:
WILO SE 2021-05