Arthrex AR-1650S Instrucciones De Uso página 26

INSTRUCTIONS FOR USE
c. Once the arm sleeve is wrapped around the operative arm, pull the Arm
Sleeve Connector to the arm sleeve by grabbing it by the grey bell section of
the connector and click the arm sleeve in place (Figure 15). Ensure that the
two white clips are exposed so that the patient is fully locked in. Apply traction
to the patient's arm as needed by adding or removing weight from the weight
hanger. This should be performed by a circulating nurse or other qualified non
sterile personnel.
d. Adjust rotation of the arm as needed. The arm can be held in the desired
location by tightening (counterclockwise rotation) the grey bell on the bottom
of the Arm Sleeve Connector.
e. To adjust the angle at which the arm is held, grab the connector by the grey bell
section and slide to the desired location (Figure 16).
Figure 16
Document Number: D-720764
Version: C
Figure 15
Page 26
Issue Date: 27 MAR 2020
Ref Blank Template: 80025118 Ver. E