INSTRUCTIONS FOR USE
Mount the Lateral Traction Sling
by attaching the loop end of
the Lateral Traction Sling on the
hook on the bottom of the
Lateral Traction Connector
(Figure 19).
Apply lateral traction by
reducing the length of the
Lateral Traction Sling. The
length of the sling can be
adjusted by either pulling
down on the loop to increase
the traction applied or
reduced by pressing on the
white clip. Use the tensiometer
on the Lateral Traction Sling
connector to determine the
amount of traction needed to
properly position the patient
(Figure 20).
Caution: Do not
exceed 30lbs (13.6kg)
traction
Document Number: D-720764
Version: C
Page 28
Figure 19
Figure 20
Issue Date: 27 MAR 2020
Ref Blank Template: 80025118 Ver. E