Troubleshooting Guide; Device Maintenance - Arthrex AR-1650S Instrucciones De Uso

INSTRUCTIONS FOR USE
Once the kickstand has
disengaged press the
upper end of the Tower
where the handle is
located into its Home
section on the lower
section of the Tower.
There should be a click
when the Tower is
completely folded and
locked in place
(Figure 27).
Remove the Tower by pressing up on the blue trigger at the bottom of the Tower.
This allows the Tower to be tilted back and removed. Place the Tower in the Cart
(AR-1650-06).

3.5 Troubleshooting Guide:

This device does not have a troubleshooting guide. For technical support user of
the device shall first contact his or her supplier.

3.6 Device Maintenance:

Make sure that all labels are installed and can be read. Replace labels as
necessary by using a plastic scraper to remove the label. Use an alcohol wipe to
remove any adhesive residue.
Contact us if you need to repair or replace the device by using the information
from the contact details section (1.3).
Document Number: D-720764
Version: C
Figure 27
Page 33
Issue Date: 27 MAR 2020
Ref Blank Template: 80025118 Ver. E