Huffy Sports AR325W El Manual Del Propietario página 11

4.
IMPORTANT! Center alignment slot of
middle pole section (5) in a lower hole
of top pole section (4) as shown. While
maintaining alignment, bounce middle pole
(5) into top pole section (4) as shown until
top pole section no longer moves toward
taped reference mark on middle pole.
Upright assembly.
SHOULD HAVE A
MINIMUM OVERLAP.
5.
IMPORTANT! Center
alignment slot of lower pole
section (6) in a lower hole of
middle pole section (5) as in
step 3. While maintaining
alignment, bounce top & middle
pole assembly (4 & 5) onto
lower pole section (6) as shown
until top & middle pole assembly
no longer moves toward taped
reference mark on bottom pole.
POLE SECTIONS
SHOULD HAVE A
3-1/2" (9 CM)
MINIMUM OVERLAP.
NOTE:
POLE SECTIONS
3-1/2" (9 CM)
WOOD SCRAP
(NOT SUPPLIED)
NOTE:
5
4
WOOD SCRAP
(NOT SUPPLIED)
11
4
5
6
01/04 P/N 214955E