Publicidad
Idiomas disponibles
Idiomas disponibles
21.
Insert bolt (47) through left side upper elevator tube (43),
then stretch spring (41) onto bolt (47). Insert bolt (47)
through right side upper elevator tube (43) and secure with
nut (39).
USE EYE PROTECTION
22.
Roll completed assembly to desired position. Secure assembly to ground using
anchor strap (52) and tie down stake (53). Fill tank with water (approx. 30 gallons
/115 Liters) or sand (approx. 255 lbs./113 kg) and snap cap (49) in place.
52
53
P/N 214955E
01/04
WARNING!
WHEN INSTALLING
SPRINGS.
49
20
43
39
47
43
41
WARNING!
DO NOT LEAVE
ASSEMBLY UNATTENDED
WHEN EMPTY; IT MAY TIP
OVER.
CAUTION!
ADD TWO GALLONS (7.6
LITERS) OF NON-TOXIC
ANTIFREEZE IN SUB-
FREEZING CLIMATES.
Publicidad
