Rohde ELS Serie Manual De Instrucciones Original página 136

Replacing the fuse:
Step Action
1 Switch off the kiln completely.
2
Remove the fuse carrier on the rear of the kiln.
3 Turn the fuse holder anti-clockwise so that it
releases from the lock.
4 Remove the fuse carrier with the fuse from the
housing.
5 Insert a new fuse.
⇒ The fuse can be inserted in either
direction.
6 Reinstall the fuse in reverse order.
7 Switch on the kiln.
8 Check the function of the kiln.
Table 40: Replacing the fuse
Remark
Set the main switch on the kiln to the "0/OFF"
position or pull the power plug.
Tool:
7 mm slotted screwdriver
Place the tool in the slot in the fuse holder.
Fuse type:
Micro-fuse T 2 A
ROHDE item no.: 705080
Tool:
7 mm slotted screwdriver
Set the main switch on the kiln to the "I/ON"
position or plug in the power plug.
If the kiln still cannot be switched on, contact a
qualified electrician, the local specialist or the
manufacturer.
135 / 492 - EN -