Time Adjustment - Citizen CHU304 Manual De Instrucciones

TIME ADJUSTMENT

Setting the clock enables measurements to be accurately recorded.
The monitor can record the date and time of measurement as well as the
measurement results. Be sure to set the clock after inserting the batteries.
1
When you install the batteries for the first time, the
monitor will display time and date by turns.
2
Press and hold both the "
and the "
two seconds, a beep is heard and the "month"
indicator blinks at first.
3
Press the "
Press the "
by one. Press the "
setting. The "month" is set and the "day" indicator blinks.
* You can fast-forward the numbers in display by pressing
and holding the
4
Press the "
Press the "
by one. Press the "
the setting. The "day" is set and the "hour" indicator blinks.
5
Press the "
"hour". Press the "
number by one. Press the "
confirm the setting. The "hour" is set and the "minutes"
indicator blinks.
6
Press the "
"minutes". Press the "
the number by one. Press the "
confirm the setting.
* Press the "
radio, etc. to complete clock adjustment.
START/STOP" switch
MEMORY" switch for approximately
MEMORY" switch to adjust the "month".
MEMORY" switch to increase the number
START/STOP" switch to confirm the
MEMORY switch.
MEMORY" switch to adjust the "day".
MEMORY" switch to increase the number
START/STOP" switch to confirm
MEMORY" switch to adjust the
MEMORY" switch to increase the
START/STOP" switch to
MEMORY" switch to adjust the
MEMORY" switch to increase
START/STOP" with the time signal on the
- Eng 8 -
START/STOP" switch to