Using The Kärcher Home & Garden App; Trademarks; M²/Accu; M²/Batte - Kärcher RCW 5 Manual De Instrucciones

ATTENTION
Before filling, make sure that the filter inlay is inserted in
the tank, otherwise the station and cleaning robot may
be damaged.
Note
For optimal cleaning results and safe driving character-
istics , we recommend using the KÄRCHER detergent
RM 506 only. If other detergents (e.g. alcohol) are used,
this can lead to functional impairments.
3. Close the tank cap and press it on.
Note
Repeat the filling process when the filling level reaches
the MIN mark.
Connect charger
1. Plug the charger into a suitable mains socket.
Illustration D
Note
If the cleaning robot will not be in operation for a pro-
longed period, unplug the charger from the mains sock-
et.
2. Insert the charging plug into the charging socket of
the station.
Preparing the cleaning robot
CAUTION
Danger of injury due to rotating drive wheels and
cleaning brushes.
There is a risk of injury due to body parts being crushed
on the rotating drive wheels and cleaning brushes.
Keep body parts such as fingers and hair as well as
loose clothing such as ties and scarves away from the
rotating drive wheels and cleaning brushes.
1. Place the cleaning robot in the station.
The detergent container of the cleaning robot is
filled automatically with detergent and the battery is
charged.
Illustration E
The battery status LED flashes green when the bat-
tery is charging and lights up green continuously
when the battery is fully charged. The device status
LED flashes green when the detergent container is
being filled and lights up green continuously when
the detergent container is completely full. An indica-
tor tone sounds at the end of the filling and charging
process.
2. Moisten a cloth with cleaning agent RM 506.
3. Hold down the on / off button and the release button
at the same time.
The drive wheels and the cleaning brush rotate.
Illustration F
4. Wipe the drive wheels with the cloth to remove dust.
5. Release the power button and the release button.
The drive wheels and the cleaning brush stop.
6. Check the main seal on the entire circumference for
correct seating in the cleaning robot mount. If nec-
essary, push the main seal into the mount.
Illustration G
7. Attach a microfibre cleaning cloth centrally on the
cleaning cloth mount.
Illustration H
Note
The black side of the microfibre cleaning cloth must face
the cleaning cloth mount. Ensure flush alignment on all
sides of the microfibre cleaning cloth.
20
For an optimal cleaning result and safe driving charac-
teristics, we recommend using KÄRCHER microfibre
cleaning cloths only.
The cleaning robot is now ready for operation.
Preparing the safety system
1. Thread the safety strap through the eyelet of the re-
tractor, guide it through the large loop of the safety
strap and tighten.
Illustration I
Note
Always secure the safety system with the safety strap
before using the cleaning robot.
Using the KÄRCHER Home &
The cleaning robot can also be controlled via the
KÄRCHER Home & Garden app. Connect it to a Blue-
®
tooth wireless technology equipped mobile device. We
recommend using the KÄRCHER Home & Garden app.
The app can be downloaded here:
®
The bluetooth wordmarks and logos are registered
trademarks of Bluetooth SIG, Inc. Any use of these
trademarks by Alfred Kärcher SE & Co. KG is under li-
cense.
Google Play™ and Android™ are trademarks or regis-
tered trademarks of Google Inc.
®
Apple and Apple Store
trademarks of Apple Inc.
English
Garden app

Trademarks

®
are trademarks or registered