Mettler Toledo EasyMax 102 Guia De Inicio Rapido página 2

EasyMax
This document will guide you through the steps of setting up of an experiment,
changing parameters in real time, visualizing data on and exporting data from
the EasyMax
For in-depth information on installation and use of the EasyMax
refer to the Operating Instructions.
1. Experiment Setup
2
102 QuickStart Guide
®
102.
®
102, please
®
• Insert the reactor into the thermostat.
You have the choice of magnetic or mechanical
stirring. If you select magnetic stirring, place the
magnetic bar into the reactor.
• Fill in starting materials, solvents, reagents, etc.
• Secure the cover of the 100 mL reactor with the
chain clamp. Make sure the Tr (temperature of the
reactor contents) sensor is immersed at least
1.5 cm into the reaction mass to provide correct
data.
• When working with one reactor only, plug in the
Tr sensor for the unused zone to avoid an error
message for that zone.
Further information can be found in the Operating
Instructions.