Connect The Product And Select Unit Settings - Erbe 20132-250 Manual Del Usuario

OBJ_DOKU-193776-007.fm Seite 40 Mittwoch, 17. März 2021 10:04 10
6.4

Connect the product and select Unit settings

Connection to an APC 2 with APC socket
IMPORTANT! This type of socket is available in two variants, with
and without finger switch activation. For the applicator, you will
need the variant with finger switch activation, which can be rec-
ognized by the large metal ring at the left contact of the socket.
1. Turn on the ESU (i.e., the VIO Model) and select the basic
program.
2. Plug the APC connector (1) of the applicator into the APC
socket (2).
1
3. For the connected applicator, a standard setting for mode,
power, effect, and gas flow is automatically made on the VIO
electrosurgical unit. You can change this standard setting
within a certain range as required.
:
2
40