Connect The Product To The Erbejet 2 + Apc; With Apc; Socket - Erbe HybridAPC Manual Del Usuario

OBJ_DOKU-193153-006.fm Seite 30 Mittwoch, 25. März 2020 4:12 16
click into place. In order to start up the pump unit, please
read the ERBEJET 2 User Manual.
8.5

Connect the product to the ERBEJET 2 + APC 2

with APC

1
1. Establish the APC connection: Insert the APC probe connec-
tor (1) into an APC socket. The probe is detected by the VIO
electrosurgical unit. The appropriate operating parameters
are automatically set, which you can modify as required
within a particular range.
2. Establish the connection to the irrigation fluid: Insert the flu-
id tube connector (2) into the pump unit of the ERBEJET 2
(art. no. 20150-300 or 20150-301). The connector must

socket

2
30