Name
Function
wj TUNING +/–
Press to scan a station.
./>
Press to skip tracks of the
VCR, CD player, VCD player,
LD player, DVD player, MD
deck, DAT deck, tape deck,
Blu-ray disc recorder, hard
disc recorder, or PSX.
2CH
Press to select 2CH STEREO
mode.
A.F.D.
Press to select A.F.D. mode.
MOVIE
Press to select sound fields
(MOVIE).
DUAL MONO Press to select the language
you want during digital
broadcast.
AUDIO
Press to change the sound to
Multiplex, Bilingual or Multi
channel TV sound of the TV,
VCR, DVD player, satellite
tuner, Blu-ray disc recorder,
hard disc recorder, or PSX.
ANGLE
Press to select the viewing
angle or change the angles of
the DVD player or Blu-ray
disc recorder.
JUMP/TIME
Press to
– toggle between the previous
and the current channels of
the satellite tuner, TV, or
Blu-ray disc recorder.
– show the time or display the
playing time of a disc, etc. of
the CD player, MD deck,
VCD player, or DVD player.
MEMORY
Press to store a station.
SUBTITLE
Press ALT (H) and then press
SUBTITLE to change the
subtitles of the DVD player.
ENTER
Press ALT (H) and then press
ENTER to enter the value
after selecting a channel, disc
or track using the numeric
buttons.
Name
Function
wj Numeric
Press ALT (H) and then press
buttons
the numeric buttons to
– preset/tune to preset
stations.
– select track numbers of the
CD player, VCD player, LD
player, DVD player, MD
deck, DAT deck, or tape
deck. Press 0/10 to select
track number 10.
– select channel numbers of
the TV, VCR, satellite tuner,
Blu-ray disc recorder, hard
disc recorder, or PSX.
>10/11
Press ALT (H) and then press
>10/11 to select track
numbers over 10 of the VCR,
CD player, VCD player, LD
player, MD deck, tape deck,
Blu-ray disc recorder, hard
disc recorder, satellite tuner,
TV, or PSX.
wk TV ?/1
Press to turn the TV on or off.
wl RM SET UP
Press to set up the remote.
a)
The MASTER VOL +, TV VOL +, TV CH +, and
H buttons have tactile dots. Use the tactile dots
as references when operating the receiver.
Notes
• The AUX and 12 buttons on the remote are not
available for receiver operation.
• Some functions explained in this section may not
work depending on the model.
• The above explanation is intended to serve as an
example only. Therefore, depending on the
component, the above operation may not be
possible or may operate differently than described.
13
GB