6: Selecting The Speaker; 7: Calibrating The Appropriate Settings Automatically (Auto Calibration) - Sony HT-DDW1500 Manual De Instrucciones

6: Selecting the speaker

Be sure to use the buttons on the receiver for
this operation.
?/1
SPEAKERS
(ON/OFF)
AUTO CAL MIC
MEMORY/ TUNING
ENTER MODE
VIDEO 3 IN/PORTABLE AV IN
PHONES
VIDEO L AUDIO R
SPEAKERS
(ON/OFF)
Press SPEAKERS (ON/OFF) to turn
on the speakers and sub woofers.
To select
The speakers connected to the
SPEAKERS terminals.
To turn off the speaker output, press
SPEAKERS (ON/OFF) again until the "SP"
indicators on the display do not light up.
32 GB
MASTER VOLUME
MULTI CHANNEL DECODING
DISPLAY INPUT MODE
INPUT SELECTOR
MULTI CH IN
TUNING 2CH A.F.D. MOVIE MUSIC
Light up
SP
7: Calibrating the
appropriate settings
automatically
(AUTO CALIBRATION)
This receiver is equipped with D.C.A.C.
MUTING (Digital Cinema Auto Calibration)
Technology which allows you to perform
Automatic Calibration as follows:
• Check the connection between each speaker
and the receiver.
• Adjust the speaker level.
• Measure the distance of each speaker to your
listening position.
You can also adjust the speaker levels and
balance manually. For details, see
"8: Adjusting the speaker levels and balance
(TEST TONE)" (page 35).
Before you perform Auto
Calibration
?/1
SPEAKERS
(ON/OFF)
AUTO CAL MIC
VIDEO 3 IN/PORTABLE AV IN
PHONES
VIDEO L AUDIO R
1
1
Connect the supplied ECM-AC2
optimizer microphone to the
AUTO CAL MIC jack.
2
Place the optimizer
microphone at your listening
position.
3
Place the speakers so that the
speakers are facing the
optimizer microphone.
MULTI CHANNEL DECODING
DISPLAY INPUT MODE
INPUT SELECTOR
MEMORY/ TUNING
ENTER MODE TUNING 2CH A.F.D. MOVIE MUSIC
MASTER VOLUME
MULTI CH IN MUTING