The selected input appears on the display.
Selected
Components that can be
input
played back
[Display]
VIDEO1 or
VCR, etc., connected to the
VIDEO2
VIDEO 1 or VIDEO 2 jack
[VIDEO 1 or
VIDEO 2]
VIDEO3
Camcorder, video game, etc.,
[VIDEO 3]
connected to the VIDEO 3
IN/PORTABLE AV IN jacks
DVD
DVD player, etc., connected
[DVD]
to DVD jack
MD/TAPE
MD deck, tape deck, etc.,
[MD/TAPE]
connected to the MD/TAPE
jack
SA-CD/CD
Super Audio CD/CD player,
[SA-CD/CD]
etc., connected to the SA-
CD/CD jack
TUNER
Built-in radio tuner
[FM or AM
band]
MULTI CH
Component connected to the
[MULTI IN*]
MULTI CH IN jack
*When headphone is connected, "HP MULTI"
appears on the display.
Note
The surround effect does not work when
MULTI CH IN is selected.
2
Turn on the component and
start playback.
3
Press MASTER VOL +/– to
adjust the volume.
You can also use MASTER VOLUME on
the receiver.
To mute the sound
Press MUTING.
The muting function will be canceled when
you do the following.
• Press MUTING again.
• Increase the volume.
• Turn off the receiver.
To avoid damaging your
speakers
Before you turn off the receiver, be sure to turn
down the volume level.
To listen to the sub woofer
Be sure to use the buttons on the sub woofer
for this operation.
1
Press POWER.
The POWER indicator lights up.
2
Turn LEVEL to adjust the volume.
Set the volume level to suit your preference
accordingly to the selected input as slight
adjustments may enhance the sound.
Note
Do not set the volume of the sub woofer to
maximum as extraneous noise may be heard.
37
GB