JVC CO-46LCD-BD Manual De Usario página 21

ENGLISH
Child Lock
S Select <Child lock> [ ] / [
Y
Off - the child lock is deactivated for all protected pro-
grammes. If the child lock was before activated, you
must enter the code before deactivating.
On - the child lock is activated for all protected pro-
grammes (see Manual station search - Child lock).
Change child lock key
The factory default of the code is 1111.
S Select <Change child lock key> with the button [
or [ ] and press the button [
B
S
Enter your 4-digit old code, using buttons 0 - 9 (e.g.
1111).
S
To cancel the code entry, you press the red button.
S
Enter the new 4-digit code (e.g. 1234).
S To cancel the code entry, you press the red button.
S
To the completion of the code change you must en-
ter the new code again.
S To cancel the code entry, you press the red button.
S To close the menu press the red button.
Enable protected programme
S Choose a programme (channel) with activated
child lock, the code inquiry appears at the screen.
S
Enter the actual 4-digit code (e.g. 1234) to enable
the of the child lock.
If you forget the code
You can reset the code only to the factory default
(1111).
S Select the menu option <Setup ⇒ OSD ⇒
to factory defaults> and press the button [
S Choose the setting Yes and press the button [
again.
Note!
All personal settings are reset to the factory defaults.
].
B
]
Y
].
"
Reset
].
"
]
"
19