Connection of external devices
Connection to SCART1 / SCART2
26
External devices such as the following can be connec-
ted to SCART1 and SCART2: DVD player, DVD recor-
der, video recorder, set top boxes and camcorders.
In addition SCART1 has the facility to connect RGB
sources.
In addition SCART2 has the facility to connect YC
sources.
If you have selected the input SCART1 or SCART2
with the [VIDEO] button, you can effect the settings
described below.
S
Press the [MENU] button to open the main menu.
S
With the button [
] or [
] select the <Setup> menu.
A
"
S
Select <Inputs> [
] / [
] and press the button [
Y
B
S
Select the desired menu option (function) with the
button [
] or [
].
Y
B
S
Select the setting [
] / [
A
"
S
To close the menu press the red button.
TV SCART
This function must be On, if automatic switching-over
to the corresponding SCART input is to take place
when the set is switched on to SCART1 or SCART2.
SCART1 RGB IN
S
SCART: if a switch voltage is pending at pin 16 from
an external device, the device switches over auto-
matically to the pending RGB signal. Otherwise a
CVBS signal is reproduced.
S
Always: reproduction of an RGB signal only
S
Unused: reproduction of a CVBS signal only
SCART2 YC IN
S
Always: reproduction of a YC signal
S
Unused: reproduction of a CVBS signal
Format detection
Select the signal (level) for format detection.
Two options are available for selection:
S
Switch voltage
Evaluation of the signal to pin 8 of the SCART
sockets.
S
Software
Detection of letterbox films on the basis of the black
bars at the top and bottom.
S
Combined
The option zooms with the switching voltage first.
If a 4:3 signal is present, the software zoom is acti-
vated with letterbox video material. The behaviour
is same as in the case of the setting Software.
It has the advantage that with connected SAT
receiver a faulty format transmission of the TV
channel (faulty switching voltage) is compensated
through the software zoom.
16 : 9 format (effective only for the format Auto Zoom!)
The menu option <16 : 9 format> is active only if
the switch voltage is set under the menu option
<Format detection>.
S
Letterbox: Picture is stretched horizontally and ver-
tically to full screen.
S
Anamorphic: Picture is stretched horizontally only
to full screen.
].
"
].
ENGLISH