Service Kits - Grundfos AUTOADAPT SL1 Serie Instrucciones De Instalación Y Funcionamiento

11.9 Service kits

Warning
Before starting work on the pump, make
sure that the fuses have been removed or
the mains switch has been switched off.
Make sure that the power supply cannot
be accidentally switched on.
All rotating parts must have stopped
moving.
The following service kits are available for all pumps.
Service kit Contents
Shaft seal kit Shaft seal complete
O-ring kit O-rings and gaskets for oil screws
Impeller complete with adjusting
Impeller
screw, shaft screw and key
1 litre of oil, type Shell Ondina X420.
See section
Oil
service
chamber.
Lifting bracket Lifting bracket and screw
Plug for power supply and O-rings for
Power plug
cover
Protective cap Protective cap and O-rings for cover
for level sensor and sensor
Level sensor, protective cap and O-
Level sensor
rings for cover and sensor
Dry-running Dry-running sensor and O-rings for
sensor cover and sensor
Electronic unit, Cover with electronics and O-rings for
single-phase cover
Electronic unit, Cover with electronics and O-rings for
three-phase cover
Pt1000 sensor Pt1000 sensor and bracket
Run capacitor, Pt1000 sensor,
Run capacitor
bracket and O-rings for cover
A possible replacement of the cable must
Caution be carried out by Grundfos or a service
workshop authorised by Grundfos.
22
11. Maintenance and
for required quantity in oil
Pump type Material
BQQP
All types
BQQV
NBR
All types
FKM
SL1.50.65.09
SL1.50.65.11
SL1.50.65.15
SLV.65.65.09
SLV.65.65.11
SLV.65.65.15
All types
0.9 - 1.5 kW
All types
All types
Standard pumps
Ex pumps
Standard pumps
Ex pumps
Single-phase
pumps
Single-phase Ex
pumps
Three-phase
pumps
Three-phase Ex
pumps
All types
All single-phase
pumps
Product number
96106536
96645161
96115107
96646049
96115096
96115097
96115098
96115110
96115099
96115100
96586753
96984147
96984144
96898081
96898082
96984130
96898083
96984131
96898085
96984145
96898086
96984146
96984143
96984142