Oki H2P-74S Guía De Consulta Rápida página 39

4
Apply wiper cleaning liquid
Apply 4 cc of wiper cleaning liquid on the head
cleaning sheet surface using a dropper. Apply 1 cc four
times as follows.
Apply 1 cc of liquid to each of the (1), (2) and (3) areas
shown in the figure to the left (3 cc in total).
Apply the liquid drop by drop to make sure it spreads
evenly on each area.
− Do not apply too much wiper cleaning liquid. The
cleaning effect will not change even if applying
more wiper cleaning liquid than indicated.
After applying liquid on zone (1)
After applying liquid on zone (2)
38
After applying liquid on zone (3)
At the end, apply the last 1 cc to fill the empty spaces.
- The cleaning liquid is shown in pink in the figures
on the left to make the operation easier to
understand. The actual wiper cleaning liquid is
transparent.
„ Head cleaning sheet usage procedure
1
S T A R T S H E E T M O U N T
C L E A N I N G ? O K / C A N C E L
Press the key.
2
O P E N C O V E R , I N S T A L L
S H E E T C L E A N I N G P A R T
Open the front cover and then the wiping cover.
Install the sheet cleaning part.