Printer Heater Unit; Operation Panel - Oki H2P-74S Guía De Consulta Rápida

Printer heater unit

This printer is equipped with three heaters for ink fusing and image quality stabilization.
Supply side
(rear)
Media

Operation panel

The keys, LEDs and LCD are laid on the operation panel of the printer as shown below. In addition, the operation panel is also
equipped with a buzzer function for attention in case an error occurs or an invalid input is entered.
5
Buzzer
3
Power switch
4
Takeup side
(front)
Head
1 2
3
- These three heaters are controlled independently.
4
LCD Indicates printer status and menus.
OK
MENU
HEATER
2
Keys
Used for menu operation and
other purposes of the printer.
1 Preheater (rear)
Preheats media.
2 Print heater (front)
Penetrates ink into media to fuse the ink.
3 Afterheater (finishing)
Dries ink to stabilize print quality.
The temperature of each heater can be controlled from
the operation panel the RIP software and Cp_Manager.
WARNING
- Do not touch these heaters to avoid burn as they
become hot.
ONLINE
CANCEL
1 LEDs
Indicate printer status with
ON, OFF, and blinking.
E
A
B
C
D