ARENDO 304943 Manual Del Usuario página 45

11. Cancelling the program
Once the program begins, the operation can be stopped at any time
using the "START/STOP" button.
12. Memory
If the power supply to the appliance is interrupted, the operation
that was previously active can be automatically resumed within 10
minutes. The bread machine can not store the data if the interrup-
tion lasts for more than 10 minutes. In this case it is advisable to
remove the ingredients from the baking mould, dispose of them
and to use new ingredients.
13. Keep-warm function
The contents of the bread machine can be automatically kept warm
up to an hour after baking. If you want to remove the contents dur-
ing the keep-warm phase, first turn off the program that is currently
active by pressing and holding the "Start/Stop" button until the
program ends.
14. Display warnings
If the display shows the code "HH: H", then the temperature inside
the bread machine is too high. The current program needs to be
terminated. Open the lid of the appliance and allow the machine to
cool down completely.
But if the display shows "EE:E" after you press the "Start/Stop"
button, then the temperature sensor is damaged and has to be
checked by a qualified service technician.
15. Baking bread
Place the baking mould on the drive shaft and turn it clockwise until
the baking mould locks into place ("LOCK"). Then place the kneader
on the drive shaft. It is advisable, for example, to apply margarine to
the kneader so that it can be removed easily after baking.
45
English