Checking And Topping Up - APRILIA SCARABEO 500 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

3

CHECKING AND TOPPING UP

WARNING
Wait for the engine to cool down before
checking or topping up coolant level.
Stop the engine and wait until it has
cooled down.
NOTE
Place the vehicle on firm and
level ground.
Open the glove compartment, see page
24 (GLOVE COMPARTMENT).
Check
that
coolant
expansion tank (2) is between the "MIN"
and "MAX" marks.
MIN
= minimum level.
MAX = maximum level.
30
use and maintenance Scarabeo 500
All manuals and user guides at all-guides.com
1
2
If not so:
Remove the front cover, see page 56
(REMOVING THE FRONT COVER).
Turn the filler cap (1) anticlockwise to
release it, but do not remove the cap.
Allow a few seconds for any residual
pressure to diskharge.
NOTE
breather tube (3) connected to the cap (1).
Unscrew and remove the filler cap (1).
level
in
the
Coolant is toxic when ingested. Contact
with eyes or skin may cause irritation.
Do not put your fingers or any other
object into the filler opening in order to
ensure that there is coolant.
Do not pull on or disconnect the
WARNING
WARNING
Coolant expands from heat. Never top
up beyond the "MAX" level mark or
coolant will leak out when the engine is
running.
Top up with coolant, see page 75
(LUBRICANT CHART) up to just below
the "MAX" mark.
Refit the filler cap (1).
WARNING
If coolant level drops too quickly or the
tank is empty, check the cooling circuit
for leaks. Have the leak repaired at an
aprilia Official Dealer.
Refit the front cover, see page 56
(REMOVING THE FRONT COVER).

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido