Network Settings - Carrier 40VCC727FQEE Manual Del Propietario Y De Instalación

2.2 Network Settings

j Click on Net mode and select "LAN1/LAN2/WLAN". "LAN1/ LAN2 "refers to the wired network, which matches with
respective " LAN1 "and" LAN2 " printed on the screen at the wiring position. When "WLAN" is selected, it means
networking with WIFI. The "Select WLAN" button is used to search the current network and connect with it.
k Once you select the network, type your password and click "OK" to connect. You can always click on the tab "Back" to
cancel the current settings.
l Select the "Automatic access to IP address". Once you select this option, the system automatically accesses the IP
address, subnet mask, gateway, DNS and other information. If you select automatic access to IP address, default
selects automatic access to DNS
m If you choose to use the following IP, select this option. You need to manually enter the IP address, subnet mask,
gateway address and activate the DNS option. Options "Get automatic DNS or use DNS" appear.
Choose the automatic DNS function. The system uses the default DNS Settings. Optional use of the following DNS is that
you can manually enter the preferred DNS address and alternative DNS address.
Click "Skip" to skip the feature setting. It automatically sets to the LAN1 interface. Use the automatic acquisition mode.
10