Alarm Prompt Setting - Carrier 40VCC727FQEE Manual Del Propietario Y De Instalación

3.10.2 Alarm Prompt Setting

The alarm prompt setting is mainly used to set a notification, whether to prompt or not incase the system detects a fault or
alarms.
j Alarm setting options: Click "Alarm Trigger Setting"/" Alarm Prompt setting"
k Shows the security selected functions.
l Prompt setting: Switch to realize "On/Off" prompt function. When "On" is selected, a popup prompt will appear whenever
the system detects a new fault. When "Off" is selected, there will be no prompt.
m Automatic silence: Automatic silence function is used to automatically turn off the alarm after the fault prompt. After
triggering the fault alarm prompt interface, when no one confirms after the set time, the fault prompt window will be
automatically closed. Set it by clicking on 'Start'.
n Prompt time setting: Setting time ranges from 0 to 100 seconds.
44