q ON/OFF button. To toggle the "Enable/Disable" function
3.15 Interlock Set
Interlock setting is used for setting the automatic switch function of the full heat exchanger and the new fan equipment.
3.15.1 Linkage Function View
The interface for interlocking settings is as follows:
j Linkage classification: Click and switch to view the linkage device type.
k Linkage device classification name: Display the current linkage device type.
l All on and All off button: Click to switch the device linkage function in the current interface to "All on" and "All off".
m Edit button: Click to enter the edit state. Then click the device tile to edit.
61