Edit Timer Action; Timed Action Of Air Conditioner - Carrier 40VCC727FQEE Manual Del Propietario Y De Instalación

3.12.5 Edit Timer Action

A timed action is used to set control instructions to be given to the designated device at a specific time. After selecting the
timer task, you can query the timer action by switching tabs, as shown in the figure below:
j Click "+" to add a new timer task.
k Click the corresponding item to mark it in the popover.
l Timing action type: Timing action can be switched to "Air conditioning/ Full heat/ Fresh air".

3.12.6 Timed Action of Air Conditioner

The air conditioning timed action popover is as follows. You can set to "Device type/Effective/Invalid/Action name/Timing
time/Timing device/Timing details".
j Type of equipment: Click and switch on the type of equipment corresponding to the timing task. You can switch either
to "Air conditioning/ Full heat / Fresh air".
k Click switch to know whether it is effective. When the timed action is effective and the trigger time is met, a control
instruction is issued. When the setting is invalid, the control instruction is not issued.
l Action name: Set the timing of the action name. Name repetition is not allowed under the current label.
m Time: You can slide the "time/minute" action and set it.
53