Current Pre-Alarm - Carrier 40VCC727FQEE Manual Del Propietario Y De Instalación

3.5.3 Current Pre-Alarm

The early warning query is mainly used to check the threshold alarm set in the system. The early warning parameter setting
can be set through the service manual. When the parameter value exceeds the setting range, an alarm can be issued.
Note: The setting of the threshold alarm can be adjusted by itself but the reported warning and fault are independent of each
other. The reported warning will not cause the shutdown of the equipment. Please create your own settings as required.
j For the query option, click on the icon "Current fault/Historical failure/Current Pre-Alarm/History Pre-Alarm".
k Select the query gateway. You can choose 'All gateways', when 'All gateways' is selected, it displays a list of the current
alarm. You can also choose to develop 'the bus gateway' address warning. Select only after screening the warning. It
is a convenient screening system warning.
30