Equipment Monitoring - Floor Navigation Mode - Carrier 40VCC727FQEE Manual Del Propietario Y De Instalación

3.2.3 Equipment Monitoring - Floor Navigation Mode

Use of floor navigation system: Quick and easy way to find an indoor unit .The control interface is shown in the picture
below:
Floor navigation map
The current wind speed and temperature mode of the IDU cannot be displayed.
j Status display: The interface can display the four basic states of "power on/power off/failure/offline". The current wind
speed and temperature mode of the IDU cannot be displayed
k "All on/All off" button: click "All on" to open all devices in the current partition, click "Full off" to close all devices in the
current partition.
l Navigation map can import floor map. It does not support the "building"/"partition" import map. The map format supports
PNG, JPEG and other common picture formats. It supports a maximum image size of 1440*900 pixels.
Note: Click the device in the floor navigation interface to enter the control interface, but remember, it does not support multi
- system control.
18