Carrier 40VCC727FQEE Manual Del Propietario Y De Instalación página 37

Click on "COM1/COM2" to update the bus and all the indoor units under the current line will be automatically grouped and
named according to different gateways.
j Click on the filter button to select "All/ edited/ unedited" to improve commissioning efficiency.
k Add/delete button: Click "-" to delete and the interface pops out as shown in the figure below. Click to select the
corresponding indoor unit. After selecting the device, click "Complete" to delete the selected device. If 'Cancel' is
selected, it will exit the delete mode.
Click "+" to manually add the indoor units, as shown below in the popover. When you are adding manually, all parameter
items are allowed to be modified. Click on "OK" to manually add the device.
The following information needs to be added for new devices.
33