Control Function Of Air Conditioning; Air Conditioning Control Interface - Carrier 40VCC727FQEE Manual Del Propietario Y De Instalación

3.3 Control Function of Air Conditioning

3.3.1 Air conditioning control interface

Click to enter the control interface. Parameters can be set on the control interface. Once its set, click on 'Send' to
complete the setting.
j Air quality parameter display: When the air conditioner or other air sensing equipment, it can display "environmental
humidity/formaldehyde concentration/PM2.5 /CO2/TVOC" and other parameters in the current position.
k Ambient displays the current ambient temperature.
l Setting displays the current setting temperature. You can adjust the setting temperature through "-"/" + ".
m On/Off button: To click the switch device & switch machine state.
n Air conditioning mode displays the current mode and can be switched to air conditioning mode.
o Wind speed setting displays the current wind speed, and can be reset to change the wind speed
p Centralized control mode: Click to switch to the current centralized control mode. You can reset to "Perform the final
Settings first/centralized/locked" mode.
Perform the final Settings first: The centralized controller/line controller/remote controller can control all functions of the
corresponding indoor units. Perform the final Settings first
Centralization: When set to centralized control mode, the wire controller/remote controller can only control the on/off of
the indoor units, and other functions are invalid
Lock: When set to lock, the wired controller/remote controller cannot control the air conditioner and displays the lock
sign.
21