Device Monitor - List Mode - Carrier 40VCC727FQEE Manual Del Propietario Y De Instalación

Contents : Click on the switch "Buildings/Floors/Groups"
13
Device/partition display
14

3.2.2 Device Monitor - List Mode

The monitor interface has a list mode in addition to the icon display interface. You can view setup information and trouble-
shooting. All devices" cannot be selected in the list mode. Only one of the devices like IDU/fresh air" can be selected for
monitoring.
The following picture shows the monitoring interface of the list mode:
j Device name : displays the current device name.
k Mode of the device : displays the operating mode of the device.
l Ambient temperature : the display range is -30-80
m Current set temperature : set temperature range from16-30
n Displays the current set wind speed.
o Shows the current centralized control mode.
p Displays the machine that sets the timing mode.
q Shows the current fault code, fault code '0' means the equipment has no fault.
r Unit address
Fresh air unit
C.
0
C.
0
16