Partition Setting; Building Arrangement - Carrier 40VCC727FQEE Manual Del Propietario Y De Instalación

l Its an automatic online button. Click "
device is operating. Once the online process is complete, it automatically displays all the current on-line indoor units
and the offline devices. It cannot not automatically delete the offline devices as the device deletion can be done only
manually.
m Edit button: Click the device into the device edit interface. The device that has been generated and saved can only
modify specific parameters.
"Device Type/Device model/Bus Address. Gateway address/Device address" cannot be modified.

3.7 Partition Setting

Partition settings are used for device partition management and are divided into three levels -"Building": a completed
building, like an office building. Each building may contain several floors. "Floor": refers to a floor in a building, each floor
may contain several zones.
"Zone": refers to the sub-division under the floor level. Each zone can contain several devices.

3.7.1 Building Arrangement

j Name of the building, click on the entry button to select the current building or click on the fold/Expand the building. Click on
" " to expand the details, and click on "
k Edit button
Click to add a new building
Click to edit the building name
Click to delete the current building
" to enter the process of automatic on-line. No activity can be done while the
" to fold the details.
36