Bauerfeind SacroLoc Manual Del Usuario página 9

All manuals and user guides at all-guides.com
Specialists 1
General notes
Check the optimal and individual t of the SacroLoc® after the rst tting. Make
corrections if necessary.
Practice the correct procedure for putting on the orthosis with the patient.
The product must not be changed in any improper way. Failure to comply with
this requirement may adversely affect product performance, thereby voiding any
product liability.
The SacroLoc® is intended for the treatment of one patient only.
Set-up and assembly instructions
You can individually adjust the tensioning straps to suit the patient. To do this,
please follow the procedure below:
First loosen the Velcro ends of the tensioning straps and attach them onto the
I
middle of the SacroLoc® fastening.
/ Either you or your patient must then take hold of the tensioning straps
II III
and pull them forward until the desired level of tension is achieved. Fasten the
tensioning straps with the loosened Velcro ends at the optimum length. Shorten
the strap to the edge of the small fastenings so that the upper part of the Velcro
fastening can easily be closed over the end of the strap.
Then attach the Velcro ends by simply fastening them onto the strap.
Version: March 2011
11