3. Wait until the steam wand has cooled down. To ensure the
wand works efficiently over time, use the special cleaning
tool (C10) to free the holes (fig. 26) of any obstruction.
6. PROGRAMMING BEVERAGE QUANTITIES
1. Prepare the appliance to deliver 1 or 2 cups of the beverage
you want to make, as far as attaching the filter holder (C1)
complete with the (C3) or (C4) filter and ground coffee.
2. Turn the dial (B8) to select the beverage being programmed.
3. Press and hold the OK button (B6) until the machine deliv-
ers the desired quantity. The OK button light flashes orange
to confirm you are in programming mode.
4. When the desired quantity has been reached, release the
OK button. The quantity is programmed.
Please note:
•
You can programme beverages, but not steam delivery.
•
Programming changes the quantity of beverage delivered,
but not the quantity of ground coffee
•
When a programmed beverage is selected, the corresponding
light flashes briefly.
•
"2x" beverages can be programmed separately.
Coffee
Default
recipe
quantity
≃ 35 ml
≃ 70 ml
2x
≃ 120 ml
≃ 240 ml
X2
≃ 250 ml
Programmable quantity
from ≃15 to ≃90 ml
from ≃30 to ≃180 ml
• espresso: from ≃15 to ≃90 ml
• water: from ≃25 to ≃150 ml
• espresso: from ≃30 to ≃180
ml
• water: from ≃50 to ≃240 ml
from ≃65 to ≃300ml
7. SETTINGS MENU
1. Access the menu:
Press together and hold
for 3 seconds
2. Select the setting to be adjusted
Correspond-
Turn to
ing setting
Pre-infusion
pause
Extra grinding
adjustment
Auto-off
Water
hardness
19
+
Press
Press
again to change
the setting
The indicator
➡ No
light corre-
sponding to
the setting
➡ 1 sec
currently
selected
➡ 2 sec
comes on
The indicator
➡ 1
light corre-
sponding to
range
the setting
currently
➡ 2
selected
range
comes on
➡ 9
The indicator
minutes
light corre-
sponding to
➡ 1.5
the setting
currently
selected
comes on
➡ 3
The indicator
soft
➡
light corre-
sponding to
the setting
medium
currently
selected
➡
comes on
/very hard
st
nd
hours
hours
➡
hard
→