Specifications - Stihl TS 510 Cutquik Manual De Instrucciones

Specifications

EPA / CEPA:
The Emission Compliance Period
referred to on the Emissions
Compliance Label indicates the number
of operating hours for which the engine
has been shown to meet Federal
emission requirements.
Category:
A = 300 hours,
B = 125 hours,
C = 50 hours
CARB:
The Emission Compliance Period used
on the CARB-Air Index Label indicates
the terms:
Extended = 300 hours,
Intermediate = 125 hours,
Moderate = 50 hours
TS 510, TS 760
Engine TS 510
STIHL single cylinder two-stroke engine
Displacement:
Bore:
Stroke:
Maximum spindle speed:
with dia. 14 in (350 mm)
(make sure that the
maximum operating
wheel speed is above or
equal to the maximum
spindle speed of your
cut-off machine)
Engine TS 760
STIHL single cylinder two-stroke engine
5.43 cu.in Displacement:
3
(89,2 cm )
2.05 in Bore:
(52 mm)
1.65 in Stroke:
(42 mm)
Maximum spindle speed:
5350 rpm with dia. 14 in (350 mm)
with dia. 16 in (400 mm)
(make sure that the
maximum operating
wheel speed is above or
equal to the maximum
spindle speed of your
cut-off machine)
Ignition System
Type: Electronic magneto ignition
Spark plug (suppressed):
Bosch WSR 6 F, NGK BPMR 7 A,
Electrode gap 0.02 in (0,5 mm)
Carburetor
All position diaphragm carburetor with
integrated fuel pump
Air filter
Prefilter, large main filter (paper filter
cartridge) and flocked auxiliary filter
English / USA
6.77 cu.in
3
(111 cm )
2.28 in
(58 mm)
1.65 in
(42 mm)
5350 rpm
4600 rpm
39