Grill - Siemens BE634.G.1 Manual De Usuario E Instrucciones De Montaje

Microwave output Maximum cooking time
in watts
600 W 1:30 hours
900 W 30 minutes
Default settings
The appliance suggests a cooking time for each mi-
crowave power setting. You can accept this value or
change it in the relevant area.
8.4 Configuring the microwave settings
When you switch the appliance on, the display always
shows the highest microwave output as a suggestion.
Note the safety instructions. → Page 34
1.
Observe the instructions on how to prevent material
2.
damage. → Page 36
Observe the information on microwave-safe cook-
3.
ware and accessories. → Page 40
Press ⁠ .
4.
a The appliance is ready to use. The display shows
the maximum microwave output as a default value.
The microwave output can be changed at any time.
Use the rotary selector to select the required mi-
5.
crowave output.
a The display shows the microwave output and a de-
fault cooking time.
Press ⁠ .
6.
Use the rotary selector to select the required cook-
7.
ing time.
Press ⁠ .
8.
a The appliance starts the operation.
a The cooking time counts down on the display.
a Once the cooking time has elapsed, a signal tone
sounds.
9 Grill
You can brown or gratinate your food using the grill.
You can use the grill on its own or in combination with
the microwave.
9.1 Grill settings
The following grill settings are available.
Grill setting Food
1 (low) ¡ Deep-dish bakes
¡ Soufflés
2 (medium) ¡ Shallow bakes
¡ Fish
3 (high) ¡ Sausages
¡ Toast
9.2 Setting the grill
Press ⁠ .
1.
a The appliance is ready to use.
Press ⁠ .
2.
a The display shows the operating modes.
Use
Heating and cooking food.
Heating liquids.
The maximum power setting is not designed for heating food.
Press
9.
Use
10.
Notes
¡ If you press
for a short time. To hide the timer function immedi-
ately, press
¡ If you open the appliance door in the meantime, the
cooling fan may continue to run.
8.5 Changing the cooking time
You can change the cooking time at any time.
Use the rotary selector to change the cooking time.
▶
a The operation continues.
8.6 Changing the microwave output setting
You can change the microwave output setting during
operation.
Use to change the microwave output.
1.
Use the rotary selector to select the required mi-
2.
crowave output.
a The cooking time remains unchanged.
a The operation continues.
Note: If the set cooking time exceeds the maximum
cooking time for the 900 W microwave output setting,
the appliance automatically reduces the cooking time.
The operation stops. Press
tion.
Use the rotary selector to select the "Grill" operating
3.
mode.
Press ⁠ .
4.
a The display shows the default value "Grill" 3.
Turn the rotary selector to set the required grill set-
5.
ting.
a The display shows the grill setting and a default
cooking time.
Press ⁠ .
6.
Use the rotary selector to set the required cooking
7.
time.
Press
8.
a The appliance starts the operation.
a The cooking time counts down on the display.
a Once the cooking time has elapsed, a signal tone
sounds.
Press
9.
Use
10.
Notes
¡ If you press
for a short time. To hide the timer function immedi-
ately, press
to end the signal tone early.
to switch the appliance off.
, the display shows the timer function
again.
⁠ .
to end the signal tone early.
to switch the appliance off.
, the display shows the timer function
again.
Grill en
to start the opera-
41