Volume & Tone Adjustments - Clarity XLC3.4+ Guia Del Usuario

XLC3.4+
The BOOST button engages the amplifier, controlling the loudness of
the phone. When the VOLUME dial is adjusted and the BOOST button
is pressed, the phone can reach up to 50dB of gain.
WARNING: VOLUME MAY BE LOUD. PROCEED WITH CARE.
BOOST On / Off
The BOOST button controls the loudness of the
receiver. Once the BOOST button is pressed, an
extra level of amplification is added over the
entire range of volume control.
VOLUME Control Wheel
During a call, the dial on the side controls the level
of volume for handset and speakerphone. The
volume dial provides up to 16dB of volume before
the BOOST button is activated. Once the BOOST
button is pressed, the XLC3.4+ will provide up to
50dB of amplification.
Auto Boost
(For turning Auto Boost On or Off, see page 24.)
ON – When the Auto Boost is set to ON, the Boost
function will be ON every time a call starts. If the
phone hangs up, the Boost function will remain
ON.
OFF – When the Auto Boost is set to OFF, the
Boost function will be OFF at the beginning of all
calls. Every time a call starts, the user will need to
press the BOOST button in order to gain the extra
level of amplification.
TONE
Press the TONE button to change the style of
amplification. Switching audio tones will change
how the telephone conversation sounds to you.
In order to achieve the best audio experience, we
recommend the following:
1. Adjust the Volume Control and enable the Boost
function (if needed). (Lower the volume level
16
VOLUME & TONE ADJUSTMENTS